+ LFK Machineries
 
+ Ferrari Tools / Limit Tools
 
+ MATE Precision Tooling
 
+ Shearing Blades
 
+ Automac U.S.A.
 
+ Golden Laser
 
+ GL Water Jet Cutting Machine
 
+ GL Water Jet Cutting Pump
 
+ Selle-Valley – Clinching Machine
     
<< Back
Automec CNC150 Backgauge System
 
  The CNC150 is an economical, simple to use control that incorporates the most popular features used in our 30-plus years experience in the pressbrake backgauging industry. It offers 150 job memory storage with up to 20 bends per job. The CNC150 will control any of the backgauge configurations allowing the operator to form the complete workpiece in one handling by controlling the backgauge, ram depth and gauge bar height of each bend.
   
  The CNC150 is our most popular control and is a simple low-cost way to improve your pressbrake productivity. Productivity increases of over 40% are typical when using this system over manual gauging. While simple, the CNC150 still offers enhanced features like reversal on pinch point and backgauge retract and delays. On 2-Axis hydraulic brakes backgauge retract on pinch point allows you to program the backgauge to retract once the workpiece is pinched in order to clear reverse bends. The backgauge retract/delay feature allows the operator to program the backgauge to retract away from the die a specified time and distance to allow the operator time to reposition the workpiece. Both the time and distance of retract can be programmed separately for each bend.
   
  All electronics are housed in a single control panel featuring easy to read LED’s. The velvet-lexan front panel features high-feedback tactile feel pushbuttons. A parts counter keeps track of total parts formed and can be viewed simply by pressing one button. When you release the button you automatically return to the program. A ram offset ± .393” and bend allowance of ± .393" can be programmed for each job to offset all dimensions in the program by the same amount.
   
  The CNC150 backgauge system comes with a two-year warranty.
   
 11-digit part storage
   
 150 jobs (00 to 150)
   
 20 bends per job
   
 Programming delay/retract between bends (0 - 9 seconds)
   
 Bend allowance ± .393”
   
 Calculator to change dimensions incrementally
   
 Parts counter
   
 1, 2, or 3 axis
   
 .001” resolution
   
 Red L.E.D. display
   
 IN/MM conversion
   
 Membrane Keyboard
   
 30-day battery back up
   
 Input power - 115 VAC ± 10% 50/60 HZ, 1A MAX (Control)
   
 2 year warranty
MINIBRUTE
Model MINIBRUTE
Holding Force 200 lbs.
# of Drives 1
Weight 200 lbs.
Overall Height 21˝
Overall Depth 41˝
Overall Width 31˝
Gauge Bar Length 66˝
Positioning Speed 600 IPM
Gauge Travel 20˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Width 3´ to 8´ 6˝

 

The MINIBRUTE compact gauge for pressbrakes with 3´ to 8´ 6˝ between sideframes. This unit is available with a 66˝ gauge bar and provides up to 20˝ of travel.

G24 Series
Model A
Holding Force 200 lbs.
# of Drives 1
Weight 200 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 16˝
Gauge Bar Length
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Width Up to 4´

 

The A compact gauge for press brakes with 12˝ to 42˝ between sideframes. This unit is available with a 3´ gauge bar for light applications.

 
Model B
Holding Force 400 lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 40˝
Gauge Bar Length
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake Sideframe Width 5´ to 8´6˝

 

The B is Automec’s most popular model. Ideal for pressbrakes with up to 8´6˝ between the sideframes.

 
Model BP or HDP
Holding Force 400 lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 40˝
Gauge Bar Length
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake Sideframe Width 5´ to 8´6˝

 

The P models are required for Amada, Promecam, and other brakes in which the rear bed clearance is less than 7˝. This low-profile backgauge bolts right to the die rail.

 
Model HD
Holding Force 400 lbs.
# of Drives 2
Weight 300 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 77˝
Gauge Bar Length 11´
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake Sideframe Width 9´ to 14´

 

The HD heavy-duty offers more rigidity for larger pressbrakes or when progressive die set-ups are used.

 
Model TD
Holding Force 600 lbs.
# of Drives 3
Weight 450 lbs.
Overall Height 26˝
Overall Depth 42˝
Overall Width 148˝
Gauge Bar Length 18´
Positioning Speed 600 IPM
Gauge Travel 24˝
Repeatability ± .002˝
Vertical Height Adjustment 10˝
Recommended Pressbrake Sideframe Width over 14´

 

The TD has 3 drive screws with the center drive flanked by 2 drives 6´ away on each side. Designed for large bed pressbrakes.

G48
Model G48HD or G48TD
Holding Force 400 lbs.
# of Drives 2
Weight 590 lbs.
Overall Height 32˝
Overall Depth 75˝
Overall Width 84˝
Gauge Bar Length 11´
Positioning Speed 600 IPM
Gauge Travel 49˝
Repeatability ± .002˝
Vertical Height Adjustment 12˝
Recommended Width 96˝ to 144˝

 

The G48 plate gauge is designed for heavy forming operations offering significant productivity improvments when handling larger, heavier workpieces.

 
 
 
 
Home About LTH Products Used Machines Support News Enquiry Contact