+ LFK Machineries
 
+ Ferrari Tools / Limit Tools
 
+ MATE Precision Tooling
 
+ Shearing Blades
 
+ Automac U.S.A.
 
+ Golden Laser
 
+ GL Water Jet Cutting Machine
 
+ GL Water Jet Cutting Pump
 
+ Selle-Valley – Clinching Machine
     
<< Back
T3 CNC Hydraulic Turret Punch Press
 
The high precision Germany hydraulic punching head, with very low impact noise.
   
Each tool can set its own TDC,BDC and punching stroke, thus eliminating manual shimming of the punch, after regrinding.
   
Constant working power independent from the stroke position  of the tool providing greater  capabilities in material thickness and hole sizes. Louvers and other forming operations are achieved with greater ease.
   
Intrinsic protection against overload can safely protect the machine and the tooling.
Model No : T3
 
  Technical Specifications Unit T3-1212
1. Punch Force KN 300
2. X-axis travel mm 1250
3. Y-axis travel mm 1270
4. Accuracy(Tolerance of hole centers) mm ± 0.1
5. Max.Sheet size(with one repositioning) mm 1270 X 2500
6. X traverse axis speed1 M/min 100
7. Y traverse axis speed1 M/min 60
8. Turret rotation speed1 R/min 30
9. Max punch stroke mm 32
10. Max sheet thickness mm 6
11. Max sheet weight2 kg 120
12. Nibbling rates max.(4mm stroke) HPM 500
13. Hit rates max.(1mm increment)3 HPM 400
14. Hit rates max.(25mm increment)3 HPM 250
15. Number of stations in turret   30
16. Maximum punch diameter mm 88.9
17. Automatic repositioning   YES
18. Main transmitting method   Hydraulic
19. Oil tank capacity Litre 225
20. Control system   Fanuc 0i-PC
21. Controlled axis   4
22. Compressed air pressure,minimum bar 6
23. Machine weight kg 12000
24. Installed power KVA 40
1. Parameter of machine in static
2. Speed of X,Y axes based on the weight of part to be work
3. 5mm punch stroke
  Technical Specifications Unit T3-1220
1. Punch Force KN 300
2. X-axis travel mm 2000
3. Y-axis travel mm 1270
4. Accuracy(Tolerance of hole centers) mm ± 0.1
5. Max.Sheet size(with one repositioning) mm 1270 X 4000
6. X traverse axis speed1 M/min 100
7. Y traverse axis speed1 M/min 60
8. Turret rotation speed1 R/min 30
9. Max punch stroke mm 32
10. Max sheet thickness mm 6
11. Max sheet weight2 kg 120
12. Nibbling rates max.(4mm stroke) HPM 500
13. Hit rates max.(1mm increment)3 HPM 400
14. Hit rates max.(25mm increment)3 HPM 250
15. Number of stations in turret   30
16. Maximum punch diameter mm 88.9
17. Automatic repositioning   YES
18. Main transmitting method   Hydraulic
19. Oil tank capacity Litre 225
20. Control system   Fanuc 0i-PC
21. Controlled axis   4
22. Compressed air pressure,minimum bar 6
23. Machine weight Kg 13000
24. Installed power KVA 40
1. Parameter of machine in static
2. Speed of X,Y axes based on the weight of part to be work
3. 5mm punch stroke
 T3-1212 Including equipment:
1.  “Fanuc” 0iPC CNC Control System (X,Y,T& C Axes) of Japan.
2.  “Fanuc” AC servo motor and servo driver of Japan.
3.  “Rexroth” high speed ball screw & precision linear guide way of Germany.
4.  30 stations double track turret (include A, B, C & D stations).
5.  Two auto-index stations (B station).
6.  X axis automatic repositioning device.
7.  2 pneumatic sheet clamps.
8.  “Bosch” pneumatic component of Germany.
9.  Two sheet clamping sensors.
10.  Two sheet distortion checking devices.
11.  Work table with hard nylon brushes and ball transfers.
12.  “H+L” hydraulic punching head of Germany.
13.  Oil tank with air cooled radiator.
14.  Electrical control cabinet with air cooler.
15.  The screw nuts are auto-lubricated.
16.  One scrap collection bin of 30 litre.
17.  6 pcs. steel insursion plates, 12 pcs. vibration proof sheets.
18.  One set of tool box.
19.  One set of Israel “cncKad” program soft and code key.
Remark :  The component with underline is an imported product.
 T3S-1220 Including equipment:
1.  "Fanuc" 0iPC CNC Control System (X,Y,T& C Axes) of Japan
2.  "Fanuc" AC servo motor and servo driver of Japan.
3.  “Rexroth” high speed ball screw & precision linear guide way of Germany.
4.  30 stations double track turret (include A, B, C & D stations).
5.  Two auto-index stations (B station).
6.  X axis automatic repositioning device.
7.  3 pneumatic sheet clamps.
8.  "Bosch" pneumatic component of Germany.
9.  Two sheet clamping sensors.
10.  Two sheet distortion checking devices.
11.  Work table with hard nylon brushes and ball transfers.
12.  “Moog” hydraulic punching head of Japan.
13.  Oil tank with air cooled radiator.
14.  Electrical control cabinet with air cooler.
15.  The screw nuts are auto-lubricated.
16.  One scrap collection bin of 30 litre.
17.  6 pcs. steel insursion plates, 12 pcs. vibration proof sheets.
18.  One set of tool box.
19.  One set of Israel “cncKad” program soft and code key.
Remark :  The component with underline is an imported product.
   Japan “FANUC” 0i-PC CNC control system
   CNC Control System Parameter and function:
A  System Parameters:
1.  CNC control system: Fanuc 0i-PC CNC turret punch press System.
2.  Memory capacity: 16M.
3.  Display: 8.4” Color TFT display.
4.  Language: Chinese or English.
5.  Communication port: RS232 port, can connect with PC (software and
 cable not included).
6.  Resolution: 0.001mm.
7.  Controlled axis: 4 axes (X, Y, T and C axis).
8.  Working temperature: 0~45°C.
9.  Relative humidity: 20~80%RH (no condensation)
   
B  System Functions:
1.  X,Y axis: Linear axis.
2.  T axis: Rotation axis.
3.  C axis: Indexing axis.
4.  NC Servo drive.
5.  Alarms of overload, limit exceed and machine failure.
6.  Soft limit protection.
7.  Self diagnosis.
8.  Specific software and programming package for turret punch press.
9.  Tool offset function.
10.  Screw pitch compensation.
11.  Backlash compensation.
12.  Manual, MDI, Edit & Auto Mode.
13.  Safety zone for clamps protection.
14.  Absolute / Incremental programming.
15.  The above are basic configuration of the CNC control system with high  
 reliability and stability.
 
 
 
 
Home About LTH Products Used Machines Support News Enquiry Contact