+ LFK Machineries
 
+ Ferrari Tools / Limit Tools
 
+ MATE Precision Tooling
 
+ Shearing Blades
 
+ Automac U.S.A.
 
+ Golden Laser
 
+ GL Water Jet Cutting Machine
 
+ GL Water Jet Cutting Pump
 
+ Selle-Valley – Clinching Machine
     
<< Back
CP NC Torsion Bar Hydraulic Press Brake
 
Fully welded steel frame, stress relieved by vibrant process.
   
Improved hydraulic system to ensure high reliability and safety.
   
Parallelism of the ram by means of a solid anti-torsion bar.
   
Motorized mechanical depth stops incorporated in the cylinders.
   
Adjustable working pressure, ram stroke, ram opening and speed change-point.
   
Retaining the ram under pressure by means of timer switch.
   
Pendant control panel with LED read-out of ram depth (except EP40).
   
Motorized back gauge with fine adjustment by hand wheel.
   
Back gauge with AC motor, lead screw and ground shaft.
   
Back gauge travel: 500mm
Technical Specification Unit EP/CP
40-20
EP/CP
100-32
EP/CP
160-32
EP/CP
160-40
  Max.Pressure KN 400 1000 1600 1600
  Table Length mm 2000 3200 3200 4100
  Distance Between
  Housings
mm 1660 2650 2640 3540
  Ram Stroke mm 100 150 200 200
  Throat Depth mm 200 320 320 320
  Table Height mm 775 900 900 900
  Table Width mm 130 200 200 200
  Daylight Opening mm 260 330 380 380
  Dimension(Width) mm 2120 3230 3280 4100
  Dimension(Depth) mm 1230 1500 1600 1600
  Dimension(Height) mm 2250 2580 2730 2730
  Ram Speed          
  Approach Speed mm/s 80 80 80 80
  Work Speed mm/s 15 15 8 8
  Return Speed mm/s 90 90 80 80
  Main Motor KW 4 5.5 7.5 7.5
  Oil Tank Capcity l 200 250 250 300
  Machine Weight(Approx.) kg 3100 7600 9300 11250
 
Holland DELEM DA41 CNC Control System
•  Controlled axis: 2 axis (Y, X axis)
•  4.7" LCD Display (240 x 320 pixels)
•  Menu driven of fast selection
•  Direct angle programming data input
•  Angle correction function
•  Manual bending sequence and positioning of all axes
•  Data storage: 100 bending steps
•  Each program can store 25 steps, each step repeat 99 times
•  Tooling parameters (punch: N/A, die 7 kinds)
•  Back gauge trabel: 500mm
•  Piece counter
•  Safety zone set up for Y and X axis
   
 
Holland DELEM DA51 CNC Control System
•  Controlled axis: 2 axis (Y, X axis)
•  7" LCD Display (240 x 320 pixels)
•  Menu driven of fast selection
•  Direct angle programming data input
•  Angle correction function
•  Manual bending sequence and positioning of all axes
•  Manual blank length calcultion (DIN6935)
•  Data storage: 500 bending steps
•  Each program can store 25 steps, each step repeat 99 times
•  10 kinds of tooling parameters (punch 3 kinds, die 7 kinds)
•  Piece counter
•  Safety zone set up for Y and X axis
 
 
 
 
Home About LTH Products Used Machines Support News Enquiry Contact